Warning: "continue" targeting switch is equivalent to "break". Did you mean to use "continue 2"? in /home/public/wp-includes/pomo/plural-forms.php on line 210
Patrick Sapinski – Patrick Sapinski


/Patrick Sapinski

About Patrick Sapinski


WiFi Pineapple firmware for GL.iNet GL-AR150

I recently picked up one of these mini routers to play with for my various IoT projects: GL-AR150 smart router, 150Mbps OpenWrt Pre-installed The AR150 uses an AR9331 SoC, the same processor found in the WiFi Pineapple. Without too much effort, you can install the WiFi Pineapple firmware on an AR150. The procedure goes like this: [...]

By |February 13th, 2016|Open Source|75 Comments

ZMR250 Quadcopter

I've built one of the popular ZMR250 quadcopters for FPV racing. Parts list: ZMR250 Carbon Frame Diatone ZMR250 PDB DALRC 5040 "Indestructible" Propellers 600TVL Camera BOS600 5.8ghz Receiver Cobra 2204 1960kv motors MultiStar 1400mAh 4s batteries Brotronics SubMicroLRS UHF 433MHZ U.FL Helical Antenna Micro MinimOSD Naze32 Flight Controller On the other end, I'm using a [...]

By |August 24th, 2015|3D Printing, Open Source, OpenSCAD, Quadcopter|0 Comments

Parametric Micro Quadcopter

I used a ~$20 Cheerson CX-10 to practice line-of-sight flying before I did anything too crazy with my ZMR250 quadcopter. The CX10 is tiny, robust, and safe to fly near people so I was able to fly it often and quickly got comfortable with flying in stabilized mode. Since the skills I learned from flying the [...]

By |May 24th, 2015|3D Design, 3D Printing, OpenSCAD, Quadcopter|0 Comments

4500w mid-drive electric bike

On my journey to make my commute through the city quicker and more fun, I fell in love with riding two wheels. After modifying a few scooters and gas bikes, I was researching quieter options and found the GNG Electric mid-drive kit, a highly moddable electric bike kit that was starting to gain popularity over on the Endless-Sphere [...]

By |November 13th, 2013|3D Design, 3D Printing|0 Comments

Litecoin BAMT

Litecoint BAMT is my fork of the Bitcoin mining distro BAMT, which I've been using to mine Litecoin and other cryptocurrency over the last few months. This distro is designed to be the easiest way to get up and running with your mining rigs, and features BAMT-PoolManager for remotely configuring your farm. Downloads & Instructions can be found [...]

By |May 6th, 2013|Cryptocurrency|0 Comments